Page tree
Skip to end of metadata
Go to start of metadata

Prepare Gigaset telephones for provisioning via wwcommunicator.

Gigaset Maxwell Basic

Firmware version 2.25.6 and higher

  1. Obtain the IP address of your Gigaset. Pressing the key  takes you to the Gigaset menu. You can see the IP address under > Settings > Local Network IP Address.
  2. Using a web browser, log in to this IP with the original password admin.
  3. Check the firmware version and update if necessary.
  4. Obtain the MAC address under Status and enter it in wwcommunicator.
  5. Create a configuration for the corresponding device.

    Provisioning/release

    Do not forget to create and release the corresponding configuration in wwcommunicator.

  6. In the telephone web interface under Settings >System > Provisioning, adjust the provisioning server to https://wwcommunicator-URL/gigaset/. Save and start automatic configuration.

Gigaset Maxwell 3 / 4 Pro

Firmware version 2.25.6 (Max 3 Pro) / 3.13.13 (Max 4 Pro) and higher

  1. Obtain the IP address of your Gigaset. Pressing the key takes you to the Gigaset menu. You can see the IP address under > Settings > Info.
  2. Using a web browser, log in to this IP with the original password admin.
  3. Check the firmware version and update if necessary.
  4. Obtain the MAC address under Status and enter it in wwcommunicator.
  5. Create a configuration for the corresponding device.

    Provisioning/release

    Do not forget to create and release the corresponding configuration in wwcommunicator.

  6. In the telephone web interface under Settings > System > Provisioning, adjust the provisioning server to https://wwcommunicator-URL/gigaset/. Save and start automatic configuration.

Werkseinstellungen

Disconnect the telephone from the power, then press the  button and turn the power back on. Keep the button pressed during the entire boot process. The telephone now starts with the factory settings.